Glediator v2.0.3
| 26 November 2018 | | 8 Comments
- Version
- Download 16174
- File Size 1.27 MB
- Create Date 26 November 2018
- Download
LED Matrix Control Software. Glediator stands for Graphical LED Installation AnimaTOR and is a small piece of software to control led matrix and led stripe installations.
Source: Solderlab. No copyright infringement intended.
Note: This file is mirrored here from the original location ("http://www.solderlab.de/index.php/downloads/category/4-glediator") because the Solderlab website seems to be down and a lot of people are looking for the file. This file will be removed when it is available again at Solderlab.
See the blog post here: Glediator with 5×8 RGB LED WS2812B Arduino Neopixel shield
8 Comments
Just thought I’d share a pastebin of the Arduino sketch one would need to make this program and also Jinx work with an Arduino Uno. Unfortunately I didn’t have the one for Megas.
https://pastebin.com/pfHUBrbw
Thank you.
I have an Arduino Nano. I am running the Glediator software on a Raspberry Pi 3. I used the Arduino sketch that you gave a link to and it uploaded successfully. But when I playing any sort of animation from the Glediator software with the Arduino hooked up to a USB port on the Pi, it isn’t playing anything. I know the connection between the Arduino and the LEDs is good because I’ve ran test programs from the Arduino. I’m just having trouble getting the animation from Glediator through the Arduino and onto the WS2812B Neopixels.
Thank you very much
Dwonload link not working
not download
Can you send me the Installation file? Donwload link isnt working anymore
hi, i cant download this file, can you send me the link to download it please? t