LED Matrix Control Software. Glediator stands for Graphical LED Installation AnimaTOR and is a small piece of software to control led matrix and led stripe installations.
Source: Solderlab. No copyright infringement intended.
Note: This file is mirrored here from the original location ("http://www.solderlab.de/index.php/downloads/category/4-glediator") because the Solderlab website seems to be down and a lot of people are looking for the file. This file will be removed when it is available again at Solderlab.
See the blog post here: Glediator with 5×8 RGB LED WS2812B Arduino Neopixel shield
A small sketch for all kinds of (8bit) Arduino boards to receive data from Glediator and push it to stripes/matrices of WS2811 / WS2812 pixels. Please read the instructions in the file header before uploading it.
Source: Solderlab. No copyright infringement intended.
Note: This file is mirrored here from the original location ("http://www.solderlab.de/index.php/downloads/category/4-glediator") because the Solderlab website seems to be down and a lot of people are looking for the file. This file will be removed when it is available again at Solderlab.
See the blog post here: Glediator with 5×8 RGB LED WS2812B Arduino Neopixel shield
A collection of 17 different lightning and thunder sounds in mp3 format. The files are numbered: '0001.mp3' to '0017.mp3'. These files belong to the blog 'Lightning & thunder: Arduino Halloween DIY project'.
A collection of 16 scary Halloween sounds in MP3 (320kbps) format. The files are numbered: '0001.mp3' to '0016.mp3'. These files belong to the blog "Arduino Halloween MP3 Soundboard".
The original firmware collection for the V56 Universal LCD TV Controller Driver Board. Instructions on using the firmware can be found in the blog post: "Reuse LCD screens with the V56 Universal Controller".
I mirrored the file here because the original page on the Banggood website has disappeared. No copyright infringement intended.
The archive is in 7-Zip format.
The original firmware for the T.RD8503.03 Universal LCD TV Controller Driver Board. Instructions on using the firmware can be found in the blog post: "Old LCD reused with T.RD8503.03 controller".
The archive is in RAR format.
I mirrored the file here for when the original page on the Banggood website disappears (which will happen sooner or later). No copyright infringement intended.